MAHLE CML-7, Руководство по эксплуатации

Страница: 15 / 44

Butto n/
Indicator #
Name Functio n
1
Enable
Once pushed and released allows the
lift system to raise/lower. Must be ON
(green) before any operation that will
raise/lower the system. Button
remains ON (green) for 5 seconds
after being pushed.
2
Single/
Paired
Begin Single/Paired operation of the lift
system.
3 Park
Park the lift system so the load is
mechanically supported on the down
stop lugs.
4
Lower
When this button is pushed the lift
system will lower until the button is
released. The Enable button must be
pushed, released, and be ON (green)
for the system to lower.
5 Raise
When this button is pushed the lift
system will raise until the button is
released. The Enable button must be
pushed, released, and be ON (green)
for the system to raise.
6
Battery charg e
level
Shows the current charge level of the
battery
on the lift unit in
communication with the To uch Screen
Controller. This indicator is only
accurate when the lift is not raising or
lowering.
7
Radio Setting
Displays the radio setting the lift unit
is using. Pushing this button will
display the Radio Signal Strength
panel.
8
Truck Indicator
Displays the location of the current lift
in relation to the vehicle. Pushing this
button will display the Main Operation
screen.
9
Weight
Pushing this button will display the
Weight panel.
10 Options
Brings up menu with additional
functions.
11 Home
Returns to the Main Menu screen.
Butto n/
Indicator #
Name Functio n
A
Low Battery
Illuminates when battery voltage
drops to a low level while raising or
lowering indicating the battery needs
to be charged.
B
Parked
Illuminates when the unit is parked,
and the load is supported on the
down stop lugs.
C Stowed
Illuminates when all lift units in the
system are fully lowered.
D
Message
Panel
Displays messages indicating system
status.
Operation
8.5 Main operation screen
The screen shown below is the main operation screen.
There are several buttons and indicators present on this
screen. See the table below for an explanation of each
button or indicator on the main screen. Several of these
buttons and indicators are also shown on other screens
and they perform the same functions on those screens as
well. After reviewing this section, proceed to one of the
following sections to perform the desired function with the
lifting system.
Fig. 10 & 11: Screen button/indicator layout
1
Enable
2 Single/Paired
3 Park
4
Lower
5
Raise
6
Battery Charge Level
7
Radio Setting
8
Truck Indicator
9 Weight
10 Options
11 Home
A Low Battery
B
Parked
C Stowed
D Message Panel
Note: Letters symbolize a button on the screen and numbers symbolize
an indicator.
CML Series | 15 | en