46
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document, are
prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will
amount to unauthorized use and shall be liable for penalty/prosecution© 2021 Mahindra & Mahindra Ltd.
13.3.2 DIAGNOSTIC PROCEDURE
STEP 1 – PERFORM KEY ASSIGNMENT
PRE CONDITION
• Turn ON ignition
TEST PROCEDURE
• Connect i-SECURE dealer programming tool using garuda VCI in the vehicle and generate
an key assignment TPK
Always use i- V4.0.7 and above for any security components ECU
programming in“XUV 7OO”
ACCEPTANCE CRITERIA
• Key assignment TPK should be generated
ACTION TO BE TAKEN
OK
NOT OK
• If the TPK generated, share it to TEKline through
TAR to get ASC or generate ASC using automated
blue signature and execute ASC. And turn ignition
OFF for 2 minutes.
• After 2 minutes turn ignition ON and Check & clear
DTCs
• And crank the engine to start the vehicle, if the
vehicle didn't start on first attempt, reset the
ignition again and try cranking again
•
Contact
TEKliner
for
further
assistance
Diagnostic Manual
XUV700 (Diesel)
UICU
MAN-01065
OCT - 2021/Rev 1
Содержание XUV700 2021
Страница 2: ......