Mahindra XUV700 2021, Руководство по диагностике

Страница: 72 / 109

72
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document, are
prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will
amount to unauthorized use and shall be liable for penalty/prosecution© 2021 Mahindra & Mahindra Ltd.
13.15 B2F4E–00 — TAG FEATURE CODING NOT DONE
13.15.1 FEATURE CODE
Immobilizer ECU (UICU) is mounted in the ignition barrel for this vehicle. TAG feature code is
return in UICU for it to understand the type of transponder/key being used.
DTC Description EMS ECU UICU DTC Description
– –
B2F4E–00 Tag Feature Coding
Not Done
DTC INFORMATION
PROBABLE CAUSES OF
FAILURE
NORMAL OPERATION
• Ignition ON
• After successful security authentication, vehicle starts
normally
DTC DETECTING CONDITIONS
• This combination is registered when the signal from
the key is not understood by the UICU
DTC REACTIONS
• Immobilizer check lamp: ON
• Engine check lamp Blinks
• Starter will not engage
HEALING CONDITION
• Ignition Off/On
• Fault not present
• UICU is not programmed
• TAG feature code not written in
UICU
13.15.2 DIAGNOSTIC PROCEDURE
This DTC normally comes only when the UICU blank, where the
TAG feature code field will be empty or when UICU is faulty. So if any of the below DTC
exist along with this DTC please follow the diagnostic procedure of those DTCs first
and then get back to this proceed.
•
Diagnostic Manual
XUV700 (Diesel)
UICU
MAN-01065
OCT - 2021/Rev 1