36
BA022301-en
Pos: 119 /Technis che Dok umentation/A lle G eräte/ Überschr iften/Üb erschriften 1.1/O/ Überschr ift 1.1: Option Drive C ontrol @ 21\m od_1277881917245_ 75.docx @ 862223 @ 2 @ 1
5.9
Option Drive Control
Pos: 120 /Technis che Dok umentation/ Bremsprüftechnik/M BT- SERIES/ 022301 MBT LON/BA/I nhalt: 0223 Bedienung Dr ive C ontrol (Bilder) @ 21\mod_ 1277290519524_ 0.d ocx @ 860353 @ @ 1
Pos: 121 /Technis che Dok umentation/ Bremsprüftechnik/M BT- SERIES/ 022301 MBT LON/BA/I nhalt: 0223 Bedienung der Option Drive Control ( Tex t) @ 27\mod_ 1327401257433_75.d ocx @ 1514373 @ @ 1
1 Drive onto the roller set with a 4WD vehicle.
2 After 2-time start-up monitoring the test stand switches automatically to DCO.
The DCO lamp starts flashing. The left roller starts automatically in driving
direction, the right-hand one in the opposite direction.
3 Brake with connected pedal force meter to max. brake force or slip. Release
brake. The display shows the driving direction of the wheels (Fig. A).
4 Now the right-hand wheel starts automatically in driving direction, the left-hand
wheel in opposite direction. Brake to the same pedal force of the left-hand
wheel. Once pedal force is reached, release brake. The rollers stop without re-
starting. The display shows the wheels’ driving direction. Pointers go to the
maximum value respectively. Now store at the respective axle using the remote
control. Change to the next axle.
5 Test the other axle as described above.
Store using keys F9 –F11.
•
Front axle: F9 (I)
•
Parking brake: F10 (J)
•
Rear axle: F11 (K)
After the measurements an “Auto OFF“ must be done.
F12 (L)! (not necessary if evaluation is done via PC-LON BASIC Program)
A
A
B
B
