31
BA022301-en
Pos: 105 /Technis che Dok umentation/A lle G eräte/ Überschr iften/Üb erschriften 1.1/P/ Überschr ift 1.1: PKW-Prüfstand mit MAH- DO T und RECO 1 @ 21\m od_1277881348839_ 75.docx @ 862103 @ 2 @ 1
5.6
Car Brake Tester with MAH-DOT and RECO 1
Pos: 106 /Technis che Dok umentation/ Bremsprüftechnik/M BT- SERIES/ 022301 MBT LON/BA/I nhalt: 0223 Bedienung PKW MAH- DO T und RECO 1 ( Bilder) @ 21\mod_ 1277189731517_0.docx @ 858873 @ @ 1
Pos: 107 /Technis che Dok umentation/ Bremsprüftechnik/M BT- SERIES/ 022301 MBT LON/BA/I nhalt: 0223 Bedienung PKW MAH- DO T und RECO 1 ( Tex t) @ 27\mod_ 1327397964107_75.d ocx @ 1514093 @ @ 1
1 Drive onto roller set.
2 Press blue Return key for pointer stop. Front axle symbol starts flashing (A).
3 Brake to slip or max. brake force.
4 Store with blue Return key.
5 Do axle change.
6 The symbol for Parking brake now flashes (B).
7 The parking brake measurement and rear axle measurement (C) are done using
the same procedure.
8 After storing the rear axle exit the roller set.
9 Now PRT (D) is flashing for printing. After confirming with the blue Return key,
the first LED of the differential display is flashing for print program. Use the
scroll key to select between program 1 or 2. Confirm again with Return and
print is done.
•
Point 8 is omitted with PC program LON BASIC.
•
An ovality measurement can be done with the right-hand Motor-ON key. The
ready lamp on the test stand is OFF during the measurement time.
A
B
C
D
E
F
