33
BA022301-en
Pos: 109 /Technis che Dok umentation/A lle G eräte/ Überschr iften/Üb erschriften 1.1/ L/Überschrift 1.1: LKW-Prüfs tand m it MAH- DOT und FFB @ 21\mod_ 1277881554584_ 75.docx @ 862163 @ 2 @ 1
5.7
Truck Brake Tester with MAH-DOT and FFB
Pos: 110 /Technis che Dok umentation/ Bremsprüftechnik/M BT- SERIES/ 022301 MBT LON/BA/I nhalt: 0223 Bedienung LKW MAH-DOT und FFB ( Tex t) @ 27\m od_1327398079546_ 75.docx @ 1514137 @ @ 1
1 Drive onto roller set.
2 Active pressure sensor starts flashing. If several Px sensors are registered,
another sensor can be selected using the desired sensor number and pound
key (#). After the measurement the sensors cannot be allocated!
3 Press F8 (H) key for pointer stop.
4 Brake until slip or max. brake force.
5 Enter axle number 1 to 9, F9 for Service brake or F10 for Parking brake and
confirm with star key (*).
6 Do axle change and test all axles. Once all axles are tested, do an Auto Off
using Remote control F12 (L).
•
Press F12. END flashes at the display. Confirm with the star key.
•
END stops flashing. Calculations are started.
•
After the calculations are complete, [E] appears. Now printing can be done.
7 The print program is started with F7 (G). Enter program number 1, 2, 3, 4 or 9
and confirm with the star key (*). Printout follows.
•
An ovality measurement can be started with F4 (D).
•
Re-display of the Service brake with axle key F9 (I).
•
Re-display of the Parking brake with axle key F10 (J).
•
Re-display of the Final evaluation with 0 + key F9 or F10.
•
Re-display of the Side-slip tester with Shift + axle key F9 (I).
Pos: 111 /-----Format- ----/MANUE LLE R UMBRUCH Seitenumbruch @ 0\mod_ 1134403577687_0.docx @ 1277 @ @ 1
