MAGUIRE Weigh Scale Blender, Установка, эксплуатация и обслуживание

Страница: 58 / 141

M A G U I R E P R O D U C T S , I N C .
58
W E I G H S C A L E B L E N D E R

To activate a new "backdoor" password, you will enter a number from 00000 to 00009 using this star
function. Each number activates a different password. Entering 0 activates the current backdoor
password, the one we have used for over 10 years. For a new one, call us and talk with someone you
know here in the office and they will supply a number from 1 to 9, and the associated new "backdoor"
password.
After this new "backdoor" password is selected, you can safely change the regular password to one only
you know, and use that in normal production. No one will be able to use the backdoor to get in. If you
forget your regular password, and you also forget which backdoor password you selected, then we will help
you go through the entire list to find the one that works.
Volumetric Mode
Press (*,8,7) to set flag for operation in a VOLUMETRIC mode. Use the * key to toggle the flag
ENABLED or DISABLED. Press EXIT when done. When power is turned off this flag is always
reset to OFF. With this flag ENABLED (VOLUMETRIC mode), the load cells are completely
ignored. Error correction and rate recalibration does not take place. The unit functions like a
volumetric feeder without checking or correcting for errors. Since load cell readings are ignored,
this flag allows operation even if the load cells become damaged. Dispense times will be based
entirely on the WT and TI parameters.
When finished, press Exit to save changes, then press Exit
again to exit out of Programming Mode.
Printout Display
Press (*,8,8) to force a printout of the display on the controller front. DATE, TIME, Machine
number, and displayed weight will print:
Date:
11/09/2006
Time: 17:22:01
Machine number: 001
Display Readout: 2000.0 g
This is useful for obtaining printed verification of load cell accuracy ISO and other international
quality program rules.
The recommended procedure is:
1. Place the unit into the Program mode.
2. Press *88 for printout of empty bin TARE weight.
3. Place a KNOWN CERTIFIED WEIGHT into the weight bin.
4. Press *88 again for printout with the weight added.
5. The different between the two weight printouts should equal the KNOWN CERTIFIED
WEIGHT.
Select Weight Unit
Press (*,8,9) to select the desired weight unit (GRAMS, KILOGRAMS, OUNCES, POUNDS) for
readout of data. For the U.S.A. systems are supplied with POUND readout selected.
KILOGRAMS are preferred for nearly all countries outside the U.S.A. GRAM or OUNCE
readouts are appropriate only for very short runs or short demonstrations. Use the * key to
toggle through the four possible selections. Press EXIT when the weight unit you want is
displayed,
then press Exit again to exit out of Programming Mode.
Update Controller Software From USB Drive
Press (*,9,3) to initiate a software update from the USB Drive. Pressing *,9,3 will cause the
controller to search the USB drive for a folder named
maguire and 3 files within the folder
maguire named: UPDATER3.BIN , 912WFxxxxx.crc , and 912WFxxxxx.s28 . If more than one
.s28 file exists in the maguire folder, the controller will prompt you to select the version. Press
the * key to toggle between versions. Press the CE key to select the version you want to
upload. The controller will then verify the file. If verification is successful the controller will
upload the new software. DO NOT turn off the controller during this process. Wait until you see
Update Complete! Then turn off the controller and turn it back on again. The update should
take only a few minutes. Updated software is available from Maguire Products free of charge
and can be obtained by calling our office or visiting us on the web
www.maguire.com .