48
Magtrol Model 6530 Three-Phase Power Analyzer
Chapter 5 – Computer Controlled Operation
OPERA
TION
Magtrol 7500 Series Power Analyzer
5.7 7500
mag.net Commands
Ieee-488
Address:
0-15
Terminator:
carriage return followed by a line feed
usb
Terminator:
carriage return followed by a line feed
When entering a command code:
1. Type all characters in uppercase ASCII format.
2. End all commands with a carriage return followed by a line feed.
3. Do not string multiple commands together in one line.
Note:
If a command is not recognized, error information will be returned.
Please see
Appendix C
for detailed explanations.
Note:
Terminator is not available on the Ethernet connection.
5.7.1
‘||*| c
oMManDs
Command Code
function
explanation
*IDN?
Returns Magtrol device
identification, serial
numbers and firmware and
fpga revisions
Magtrol,75N0, SSSSSS,FIRM,FPGA
Where N is the channel count (1, 2,3, 4)
Where SSSSS is serial number of the
assembly
Where FIRM is revision firmware
Where FPGA is revision firmware
Example
Magtrol,7530,17A75000001,A0,A0
5.7.2
|Meas|
ure
c
oMManDs
Command Code
function
explanation
MEAS:ALL
Outputs all available
measurement values as
a single comma delimited
string. Values are given in
E notation.
Output:
A1, V1, W1, A2, V2, W2, A3, V3,
W3,∑A, ∑V,∑W, f
