Magtek ExpressCard 500p Скачать руководство пользователя

Страница: 4 / 68

Getting started

1-1 Unpacking

The device is shipped in special packaging designed to prevent any damage in transit. If you notice any visible damage, do not hesitate to contact

the shipper and immediately inform MagTek Support Services, which will tell you the procedure to follow. Please maintain packaging.

You will be asked for the full original packaging (outer box, inner wedges and protective bags) in the event that the device is returned. If the

device is returned without its original packaging and components are damaged in transit, these components will no longer be covered by

the warranty. You will be charged for new packaging for shipping the device back to you.

Accessories supplied with your device:

•

Power supply unit - SWITCHBOX Type F10723-A or CWT Type KPL-065M.

• Power cable.

• USB cable.

• Card rejection bin.

• Installation, documentation and software CD-ROM.

• Starter cleaning kit.

• Quick installation guide.

• Warranty notice.

If any of these components is missing, please contact MagTek Support Services.

Use only the power supply unit supplied with your MagTek device.

SWITCHBOX Type F10723-A or CWT Type KPL-065M. Use only the USB cable supplied with your MagTek device.

The MagTek device must be placed in a dry location, protected from dust and drafts but well-ventilated.

Keep your device on a flat, sturdy surface able to bear its weight.

Содержание ExpressCard 500p




































































Результаты поиска

Содержание ExpressCard 500p

Отзывы:

Похожие инструкции для ExpressCard 500p

Бренды по названию

Популярные бренды

Magtek ExpressCard 500p, Инструкция по установке и эксплуатации

Результаты поиска

Содержание ExpressCard 500p

Отзывы:

Похожие инструкции для ExpressCard 500p

Бренды по названию

Популярные бренды