59
Appendix B
B-1 Encoding options
Some models of MagTek devices are equipped with encoding systems which are used to customize magnetic stripes, and contact and contactless
smartcards.
B.1.1 - MAGNETIC STRIPE ENCODING
A device fitted with a magnetic encoder works in exactly the same way as a basic card device. The MagTek encoder encodes the magnetic stripes
in a single pass then runs a data check.
Although able to be configured as high coercivity (HiCo) or low coercivity (LoCo) by a simple click in MagTek Print Driver, MagTek magnetic
encoders come factory set for high coercivity (HiCo).
Location of the magnetic encoder
The magnetic encoder is a module installed either in the factory or on site by a MagTek Authorized Service Provider. The read and write head is
located under the path taken by the cards and before the print head. The encoding sequence for a card is always carried out before the printing.
Use only magnetic stripe cards that comply with ISO 7810 and ISO 7811 standards.
The magnetic stripe must be molded into the card to work properly.
Never use cards with a glued-on magnetic stripe.
B
