37
5.2.3 Servicing the Dust Filter
The dust filter is located above the print head fan. This filter can become fouled up over time and it is recommended to clean it
once a year or every 10,000 cards depending on your working environment.
1.
Open the device access door. Locate the dust filter.
2.
Remove the filter by pulling it upwards and slide it out to release it completely.
3.
After the filter is removed from its slot, obtain a cleaning wipe supplied by MagTek.
4. Clean the filter by rubbing the wipe on either side of it.
5.
Re-install the dust filter by inserting it in its slot (notch towards you) and lower it until you feel a click indicating it is correctly positioned.
6.
Close the access door.
5
1
3
2
4
5
6