52
5.16.5 Feeding table upper limit and skewing adjustment
In figure 1, the upper limit switch can adjustment the distance between suction
belt and first sheet. Turning the switch clockwise makes the distance shorter
(or called the feeding table goes higher); turning the switch counter-clockwise
make the distance longer (or called the feeding table goes lower).
When the crease/folding line in the product is skewed (or it is not
perpendicular to the side of paper), user can adjust the skewing adjustment
switch to change the infeed angle for better result. In the figure 2, when turn
the skewing adjustment switch downward, the side guide of the feeding table
will move to operation side; turn upward will make the side guide to non-
operation side.
Note: usually, this side guide does not need to be adjusted, as long as the
paper is in a good sharp that the corners are perpendicular.
Upper limit switch
①
②
Side guide of the feeding table
Skewing adjusted level
Skewing adjustment switch
