20
5.2 Touch screen calibration
User doesn’t press the OK key but clicks other place of screens 3 or more
times continuously. Screen will enter calibration mode and a red dot appears
in the screen. User click the dot with a pointy pen step by step, then screen
will enter welcome screen. Calibration is finished. This should be done while
the touch screen could not be touched properly.
5.3 Home Screen
After click the “OK” button of the welcome screen, the main screen will show
up.
# Name Explanation
1 Edit
When user need to make a new job
2 Set
Machine setting; service mode; screen light and unit
adjustment
3 Down Feed table go to the lowest level
4 Open
Open the saved jobs
5 Run
Go to run screen
1
5
4
3
2
