25
If user wants to do crease-only without any folding, please click the “folding
data” button (see the table in chapter 5.4, the 6
th
item). The message, shown
in figure 3, will show up. Please click “no” to keep current crease data (unless
user want to clear all crease data). Then, the folding data setting screen will
show up. Click the “Crease-only” button, which is shown in figure 4.
Next, click the return, back to the data preview setting screen, shown below.
This is a job with crease only.
Finally, click the “run” button to go to run screen to start the job.
Note: if user wants to do folding, user can directly go to the folding data
setting screen and choose the preset job data (or manually input).
①
②
③
④
Crease-only button
