Magnum H64, Инструкции по установке и Руководство пользователя

Страница: 42 / 56

42
Advanced settings (TIP: this can be done easily through the App)
To activate the advanced menu: Turn off the thermostat (press and hold “O” for 5 sec).
1. press and hold the “+” and “-” buttons for 3 seconds (Display shows “0 1”).
2. Press “+” or “-” to select a the option (0 1 - 10)
3. Briefly press “O” to select and then “+” or “-” to adjust the parameter.
4. Briefly press “O” to exit the option (Follow again from point 2 to adjust other options).
5. Save: Press and hold “O” to save all settings and turn the device off again.
Factory settings: Long press “+” and “-” at the same time, “dEf “should flash 3 times.
Option Function Parameters Default
0 1
Temperature calibration -6°C ~ +6°C 0°C
02
Maximum temperature setting 25~50°C 35°C
03
Minimum temperature setting 5~20°C 10°C
04
Screen illumination
1: Always on
2: 10 seconds on, then 50% dimmed.
3: 10 seconds on, then display off and “O” 50% dimmed.
2
05
Water resistance On/Off On
06
Allow key distribution On/Off On
07
Sensor selection S-r / r-F / S-F (See page 41) S-r
08
Maximum floor temperature 5~70°C 40°C
09
Frost protection On/Off On
1 0
Pump delay (0-3 minutes)
(Master thermostat only)
1-3: 1, 2 or 3 minutes delay for pump and boiler.
0: No delay for pump and boiler.
3