Magnum H64, Инструкции по установке и Руководство пользователя

Страница: 35 / 56

34 35
L N L N L N L N L N L N L N L N L N L N L N L N L N L N
Power Pump R1 R2 R3 R4 R5 R6 R7 R8 G1 G2 W1 W2 W3 W4 W5 W6 W7 W8 Cooling
COM NOCOM NO ° C ° C ° C ° C ° C ° C ° C ° C COM NO
AC
Cooling changeover port
W1-W8:connect to thermostat
low voltage, regardless of null
line and fire line
.
W1 must
connect with master thermostat
Water pump(Current<5A)
Power supply(100-240VAC 10A)
L:Fire Line N
:
Null line
:
Earth line
R1-R8:Connected electric heating actuator
(the total current<5A)
G1
、
G2
:
Passive linkage
(can be linked to boiler, heat pump host, mixed water device)
(Current<5A)
Wiring diagram
Wiring control centre H64-CC
Precautions
① W1-W8: Connected to the thermostat, low voltage, regardless of null line and fire line,
W1 must be connected to the master thermostat, W1 corresponds to an area.
② R1-R8: Connected electric heating actuator, R1 corresponds to W1, R2 corresponds to W2, and so on,
R1-R4 can be connected to two electric heating actuators respectively, the total current does not exceed 5A.
15
R1-R8: Aansluiting actuatoren (230VA)
(Totale stroom <5A)
Circulation pump current<5A
Power supply (100-240VAC 10A)
L = Line N = Neutral = Earth
W1-W8: connect to the low voltage
thermostat, without polarity.
W1 must be connected to the master
thermostat.
Port switching to cooling mode
G1, G2: Passive connection (potencial-free contact)
Connection for boiler, heat pump or mixing system (Max. 5Amp.)
5. Connection diagram
Thermostat connection W1-W8:
Connection thermostats (Master thermostat always on W1).
Actuator Connection (230VA) R1-R8:
R1 = W1, R2 = W2 etc....
Group R1-R4: Are dual and 8 actuators (4 per input) can be connected there.
Group R5- R8: Max 4 actuators per input.
Total: R1-R4 (4x8) and R5-R8 (4x4) = 48 actuators.
CAUTION: The total current should never exceed 5 amps.
Assembly and installation H64-CC Control unit