Magnum H64, Инструкции по установке и Руководство пользователя

Страница: 34 / 56

34
2. Use the back plate to mark the hole position, and then use an impact drill (6mm drill bit) to
make the screw holes (if there is a mounting rail, you can ignore it)
6mm drill bit
07
3. Montage
Use the back plate to mark the position of the drill
holes. Drill the holes with a 6mm drill bit, insert
the dowels and secure the back plate with the
screws provided.
Ø 6mm
3. Press the buckle to remove the anti-electrical board, and then connect the wires referring to wiring
port and the marked wiring on the anti-electrical board.
Buckle
Anti-electrical board
08
Sparing
Afdekplaat
4. Remove cover plate
Press the notches on the side to remove the cover
plate. After connecting the cables, attach the
cover plate and insert the front housing.
Assembly and installation H64-CC Control unit