Magnetic Autocontrol MPS-122, Руководство по эксплуатации

Страница: 55 / 90

Swing Door MPS-122
Setting swing door parameters – "MPS-Diag"
5817,0011EN / Version 04 55
10.1 Driver installation under Windows 7
To establish a connection with your swing door MPS using the
programme "MPS-Diag", you need to install the necessary drivers
and enter the port number in the programme "MPS-Diag".
Driver installation
possibilities
There are the following options for driver installations:
Automatic driver installation via setup assistant:
 The latest driver from the internet is installed.
 The included driver is installed.
Manual driver installation:
 The latest driver from the internet is installed.
 The included driver is installed.
NOTE!
For more information on the driver, see
http://ftdichip.com/Support/Documents/
AppNotes.htm
10.1.1 Automatic driver installation via setup assistant
Using the driver from the
internet 1. Plug the USB cable into the USB socket of the computer.

Windows 7 automatically recognises the newly connected
hardware and looks for a matching driver online. The
message "Installing device driver software" appears on the
display.

The driver is installed automatically.
 After successful installation, the screen shows the
message "USB Serial Port (COM). The device driver
software was installed successfully".
2. Start setup of the programme "MPS-Diag".
3. Perform installation according to setup assistant.
4. As a last step, the view "Terminating the MPS-Diag" appears.
5. Deactivate the check box "Install USB driver".
6. Click the button "Finish".
7. Use the "Device Manager" to determine the port number and
enter it in the programme "MPS-Diag".
→
See page 57,
chapter 10.1.3.
 If the entry in the device manager is missing, you need to
install the included driver.
→
See following chapter.