Magnetic Autocontrol MPP-112 Скачать руководство пользователя страница 31

Страница: 31 / 88

Pedestrian Pivot Barrier

MPP-112 / MPP-122 / MPP-132 / MPP-212 / MPP-222

Assembly and installation

5817,0016EN / Version 00

7 Assembly

and

installation

7.1 Safety

General

WARNING

Danger by inappropriate installation!

Inappropriate installation can cause severe injuries!
– Only qualified personnel, authorised by the

operator and instructed appropriately, may carry
out installation tasks.

– Before beginning work, ensure that there is

sufficient assembly space.

– Pay attention to tidiness and cleanness at the

assembly site! Loosely stacked or discarded
components and tools are accident sources.

– Ensure specification for foundation anchors.
– Ensure correct arrangement and correct fit on

the components.

– Install all fastening elements correctly.

Improper transport

WARNING

Danger from improper transport of the
pedestrian barrier!

The weight of the pedestrian barrier can severely
injure a person!
– Have all transport work performed by trained

personnel.

– Use lifting gear or forklift with a suitable pallet.
– Use suitable lifting gear (loops, etc.) for lifting

the pedestrian barrier. The lifting gear must be
designed for the respective weights.

– Lifting and carrying the pedestrian barrier from

the pallet should be done by a minimum of two
people.

Heavy weight

WARNING

Risk of injury when lifting heavy objects alone!

The weight of heavy objects can severely injure a
person!
– Lifting and carrying the pedestrian barrier from

the pallet should be done by a minimum of two
people.

Содержание MPP-112

























































































Результаты поиска

Содержание MPP-112

Отзывы:

Похожие инструкции для MPP-112

Бренды по названию

Популярные бренды

Magnetic Autocontrol MPP-112, Руководство по эксплуатации

Результаты поиска

Содержание MPP-112

Отзывы:

Похожие инструкции для MPP-112

Бренды по названию

Популярные бренды