Ethernet Module
MGC-PRO MicroDrive
Installation and network connection
5815,0001EN / Version 00
11
3.4
Menu "Ethernet" of the control unit MGC-PRO
Once the Ethernet module is plugged in and the control unit
supplied with power, the menu "Ethernet" appears in the main
menu.
The position of the menu "Ethernet" in the main menu depends on
the other plug-in modules installed and the slot used.
Operating view
Main menu
Ethernet
Parameters
Description
Network settings
Display and setting of the network settings
Web server
Switching the web server on and off.
You may switch off the web server to prevent unauthorised access to the barrier.
With the webserver switched off, communication is only possible via Modbus.
Factory setting
ON
Information
Displays information via the Ethernet module. The serial number, hardware version,
software number and software version of the Ethernet module are displayed.
Table 4: Menu "Ethernet"
Operating view
Main menu
Ethernet
Network settings
Parameters
Description
MAC
MAC address display
NAME
Plug-in module's host name
Factory setting
microdrive-XXX
"XXX" corresponds to the last digits of the serial number of the plug-in module.
DHCP
Activating and deactivating DHCP.
IP
MAC address display
Mask
Subnet
mask
display
Gateway
Display of the IP address of the default gateway
1. DNS
Display of the IP address of the preferred DNS server
2. DNS
Display of the IP address of the alternative DNS server
Table 5: Menu "Network settings"
