Magnetek Flex Pro Series, Инструкция по эксплуатации

Страница: 8 / 24

Flex Pro Tethered Controller Instruction Manual
April 2019
Page 8 of 24
3.3 SAFETY INFORMATION AND RECOMMENDED TRAINING FOR
REMOTE CONTROLLED EQUIPMENT OPERATORS
Anyone being trained to operate remote controlled equipment should possess as a minimum the following knowledge
and skills before using the remote controlled equipment.
The operator should:
•
have knowledge of hazards pertaining to equipment operation
•
have knowledge of safety rules for radio controlled equipment
•
have the ability to judge distance of moving objects
•
know how to properly test prior to operation
•
be trained in the safe operation of the radio transmitter as it pertains to the equipment being operated
•
have knowledge of the use of equipment warning lights and alarms
•
have knowledge of the proper storage space for a radio control transmitter when not in use
•
be trained in transferring a radio control transmitter to another person
•
be trained how and when to report unsafe or unusual operating conditions
•
test the transmitter emergency stop and all warning devices prior to operation; testing should be done on each
shift, without a load
•
be thoroughly trained and knowledgeable in proper and safe operation of the equipment that utilizes the radio
control
•
know how to keep the operator and other people clear of hazardous areas
•
know and follow the local lockout and tagout procedures when servicing radio controlled equipment
•
know and follow all applicable operating and maintenance manuals, safety procedures, regulatory
requirements, and industry standards and codes
The operator shall not:
•
operate the equipment if the direction of travel or function engaged does not agree with what is indicated on
the controller
•
operate any damaged or malfunctioning equipment
•
change any settings or controls without authorization and proper training
•
remove or obscure any warning or safety labels or tags
•
leave power on the radio controlled equipment when the equipment is not in operation
•
operate any equipment using a damaged controller because the unit may be unsafe
•
operate manual motions with other than manual power
•
operate radio controlled equipment when low battery indicator is on