6 (E)
4. MG70-EI (X20BC0088) main unit settings
4.1. IP address settings
The main unit IP address settings are made using the X20BC0088 Web server
function.
Check the following items before making the settings.
・
The number of nodes switch of the X20BC0088 should be set to “0xFF” before
supplying power to the X20BC0088.
・
The development computer and the X20BC0088 should not be connected.
* This is to prevent IP address conflict between the development computer and the
X20BC0088.
1.
Temporarily set the IP address of the development computer to “192.168.100.2”
and the subnet mask to “255.255.255.0”.
2.
Use an Ethernet cable to directly connect the development computer and the
X20BC0088.
3.
Start up a Web browser such as Internet Explorer.
4.
Enter “192.168.100.1” in the URL field and access that IP address.
This operation enables access of the X20BC0088 Web server.
Fig 4-1
X20BC0088 -- IP address setting -- No.1
