MAGNAWELD monoTIG 160ip, Руководство пользователя

Страница: 18 / 56

18
www.magmaweld.com USER MANUAL | KULLANIM KILAVUZU
monoTIG 160ip
EN
3.1 User Interface
OPERATION
Operation
Multifunctional Pot
İs used for selecting and adjusting welding parameters. To select a parameter, press the button and
observe that the corresponding led lights. Clockwise and counter clock wise turning of the pot,
increases and decreases the value respectively. To store the value, press the button.
Multifunctional Display
Displays the value of the welding parameter which is selected by mutlifunctional pot. Plus it displays
the welding current value during welding.
Program Display
Displays the number of the selected program.
Program Selection Button
İs for selecting the desired program.
Welding Mode Selection Button
İs for selecting MMA, HF Start TIG and Touch-Lift TIG modes.
When MMA mode is selected, its led
(6)
lights.
When Touch-Lift TIG mode is selected, its led
(7)
lights. In this mode, arc starts after touching the
tungsten electrode to the work-plece and lifting the electrode.
When HF Start TIG mode is selected, its led
(8)
lights. In this mode, arc starts via ignition through the
gas without any torch touching to the work-piece.
1
2
3
4
5
9
2 Stroke - 4 Stroke - Spot Welding Selection Button
İs for selecting 2 Stroke - 4 Stroke - and Spot Welding Modes.
When 2 Stroke TIG is selected, its led
(10)
lights.
When 4 Stroke TIG is selected, its led (
11)
lights.
When Spot Welding is selected, its led
(12)
lights.