MAGNAWELD monoTIG 160ip, Руководство пользователя

Страница: 16 / 56

16
www.magmaweld.com USER MANUAL | KULLANIM KILAVUZU
monoTIG 160ip
EN
• Connect the earth cable plug to the positive welding socket tightly.
• To increase the quality of the welding, connect the earth clamp
tightly to the work-piece as close as possible to the welding area.
2.3.4 Torch Connections
2.3.5 Grounding Pliers Connections
Figure 4 : Mounting the Torch Plug and the Torch
Figure 5 : TIG Welding Connections
• Unscrew the clamping cap.
• Remove the existing tungsten electrode from the collet and
insert the new electrode in.
• Insert the collet into the torch.
• Scrrew the clamping cap tightly.
• The ceramic gas nozzle and the tungsten electrode
diameters should be selected according to the working
current and the shape of the work-piece.
Therefore the collet, the collet body must be matched with
the diameter of the tungsten electrode.
2.3.6 Tungsten Electrode Replacement
Figure 6 : Changing the Tungsten Electrode
• Connect the TIG torch plug that you’ve prepared to
the negative welding socket tightly.
• Screw the gas hose of the torch to the gas outlet.
• Insert the connector pins to the torch control
connections.
• In case of using water cooling unit, connect the water
hoses of the water-cooled torch to the water cooling
unit.
Installation