MAGNAWELD monoTIG 160ip, Руководство пользователя

Страница: 11 / 56

11
www.magmaweld.com USER MANUAL | KULLANIM KILAVUZU
monoTIG 160ip
EN
1
4
5
6
7
8
9
10
2
3
1-
Control Panel
6-
Earth Cable and Welding Cable Socket (+)
2-
Earth Cable and Welding Cable Socket (-)
7-
Gas Outlet
3-
Torch Control Connections
8-
Line Cable Inlet
4-
Thermic / Error Led
9-
Gas Inlet
5-
Multifunctional Adjustment Pot
10-
On / Off Switch
TECHNICAL INFORMATION
1.1 General Information
monoTIG 160ip is an inverter type portable, mono-phase pulsed DC TIG/MMA welding machine designed
for TIG welding of all kinds of thin metal sheets except aluminum & for MMA welding of all kinds of stick
electrodes up to 4 mm. Enhanced professional TIG controls such as, HF start, Touch-Lift, pre-gas, up-slope,
pulse, down-slope, post-gas & crater filling are present. Up to 10 complete jobs can be stored in the memory
and run when it is necessary. Current, time and program settings can easily be monitored by digital displays.
monoTIG 160ip proved well that it can work between 160 to 240 V 50/60 Hz line voltages. Therefore this
machine is quite immune to mains voltage fluctuations and perfectly welds with generator-sets.
monoTIG 160ip can also be used with long welding cables up to 25 mt. The machine is fan cooled any
thermally protected against over heating.
Figure 1 : monoTIG 160ip
1.2 Machine Components
Technical Information