MAINTENANCE
The front panel gets secured to the chassis as it slides into grooves along the front edges of the
plastic cases. Projecting through the front panel are three status indicators. These are red, yellow,
and green LEDs, referred to as ”trafiic lights".
The rear panel is attached to the chassis by one Phillips screw and parts on the two cards; namely,
the Antenna connector on the RF/power supply card and the MULTI-PORT Interface connector
on the processor card.
Additional rear panel parts are:
• ground stud (for chassis grounding)
• power mode switch (OFF/ON/REMOTE switch)
• power socket
• 1PPS output connector, optionally used for system timing.
20
