MAINTENANCE
RESETHNG THE SOLID STATE FUSE
'Ihe solid state fuse (thermal circuit breaker) is located in the power input housing on the RF/power
supply CCA. To reset it, remove the power cord from the rear panel receptacle and replace it after
10 seconds. If the problem persists, or recurs repeatedly, remove power from the equipment and
obtain service from your authorized Magnavox dealer.
TROUBLESHOOTING
The receiver traffic lights not only indicate operational status but also can aid you in identifying
common problems. Use Table 6 to identify common problems and remedies.
Table 6. Troubleshooting Table
{ Status Indicators
{ Rad Y now Probable Cause Recommended {
. e
{ _ ._._ _- Em.; _. -_._r,___,_i_ ._ ;{
- Circuit breaker Reset circuit {
{ tripped or no breaker by
{ power to unit. toggling power {
{ switch ON/OFF
{ positions. {
{ OFF Not tracking 1) Check for
{ satellites. proper antenna
{ connection.
{ 2) Verify clear
{ visibility to
skyline. {
{ 3) See below. {
{ OFF OFF FLASHING Tracking satellites 1) if in Search- {
{ but not the·Sky, wait for
{ navigating! additional
{ computing satellites to be
{ corrections. acquired.
{ 2) Check {
operator-entered {
{ elevation limit. {
A 3) Check
operator-entered
DOP limit.
26
