Magma EB3600-AB, Руководство пользователя

Страница: 20 / 143

Magma
EB3600-AB | Chapter 2 Hardware Installation 20
Installation-Procedures Overview
Below is the concise version on how to set up the EB3600-AB.
1. Open Enclosure
2. Install Expansion Interface card(s) (If not installed).
3. Install Host Interface card(s) into host computer
4. Install Cable (Connect A to A and B to B on interface cards between the host and expansion
chassis)
5. Install PCIe cards (see notes below)
6. Attach Power Cords
7. Connect to Electrical Outlet – verify adequate circuit capacity for wattage needed (this may
require multiple circuits)
8. Power- ON (power-up) EB3600-AB
9. Power-ON (power-up) Computer
10. Hardware Check
11. Verify Installation (via Operating System)
NOTE
It is highly recommended to install any 3
rd
party PCI-E cards / High Power PCIe cards after
you have verified and tested the Magma expansion is functional and no hardware failures.
When installing 3 rd Party PCIe card, start with one card first just to see if there are any software and
hardware issues or incompatibility problems that may occur. This way you can troubleshoot the problem
more easily and efficiently. If everything works well and there are no configuration issues, you can proceed
with the installation of the remaining 3
rd
party PCIe cards.
Always refer to or read “3
rd
party manufacturer installation guide” for further instructions.