Magma EB3600-AB, Руководство пользователя

Страница: 109 / 143

Magma
EB3600-AB | Chapter 5 Management Console I/O Manager 109
Reset the chassis to default parameters
If the chassis is not working properly or having issue accessing the IP address, you have the option of
resetting the entire system. There are two methods on resetting or restoring the expansion system to
default parameters.
1. By pressing the front power push button 10 times continuously
2. By flashing the Netburner.
If your unit does not reset by pressing the front power push button, apply the 2 nd method, which is flashing
the Netburner.
Pressing the front power push button
Restore or rest your chassis to the factory default values by pressing front button 10 time continuously .
When all values have been restored, the expansion will shut down and reboot back up.
Follow these steps:
A. Turn OFF the Host computer.
B. Turn OFF the expansion unit.
C. Disconnect the expansion unit from the Host computer.
D. Turn ON the expansion unit.
E. Press the front “Button” (a.k.a Power On Button / Front LED) ten times continuously.
F. The expansion unit will shut down and reboot back up. If it does not power up, press
the front button to power it up.
G. Start your Internet Browser
a. Type 192.168.1.10
b. Enter User name: Admin
c. Enter password: magma
d. You should be able to login. Check, the SNMP make sure it is set back to
default configuration.
Flashing the Netburner
This method allows you to reload the existing program or update with a new program. Go to Chapter 8 for
detailed instructions.