Magiglo Premos 18" Inset, Инструкция для пользователя, установки и обслуживания

Страница: 26 / 52

Page 22
2.8. Cleaning and Care Instructions
CAUTION: Ensure that the appliance is off (including the pilot light) and has
completely cooled (off for at least 2 hours) before carrying out any cleaning or
maintenance.
RCF Advice:
This product may use Components (Coals, Pebbles, Driftwood & Ceramic backs)
containing Refractory Ceramic Fibres (RCF), which are man-made vitreous
silicate fibres. Excessive exposure to this material may cause irritation to eyes,
skin and respiratory tract.
Therefore during installation and servicing we recommend that you use a HEPA
filtered vacuum to remove any dust and soot accumulated in and around the fire
before and after working on the fire, to ensure that the release of fibres from
these RCF articles is kept to a minimum.
We recommend that you should follow the normal hygiene rules of not smoking,
eating or drinking in the work area.
When replacing Components containing Refractory Ceramic Fibres (RCF), we
recommend that the replaced items are not broken up, but are sealed within
heavy duty polythene bags, and clearly labelled as RCF waste. RCF waste may
be disposed of in suitably licensed landfill sites.
2.8.1. Cleaning the Fire-Bed and the Imitation Fuel Effect
1. If excessive debris is observed on the
imitation fuels or fire-bed, this must be
removed before further using the fire.
2. Carefully remove all the imitation fuel
from the fire-bed. Any soot or debris on
the fuel can be gently brushed away with
a soft brush - DO NOT use a vacuum
cleaner.
3. Use a low powered HEPA filtered
vacuum cleaner with a small nozzle to
clean the burner board by gently
sweeping the nozzle above the surface
of the board. Clean the ports (small
holes on the board) in a similar fashion.
4. Relay the imitation fuel after cleaning, in
accordance with the layout instructions in
this booklet.
5. When satisfactory flame appearance has
been achieved after positioning the
coals/pebbles/driftwood, they should not
be moved unnecessarily.
Constant
moving of the imitation fuels will
damage them and/or cause
discolouration.