Magiglo Premos 18" Inset, Инструкция для пользователя, установки и обслуживания

Страница: 29 / 52

Page 25
3. I
NSTALLATION
I
NSTRUCTIONS
Before installation, ensure that the local distribution conditions (identification of the
type of gas and pressure) and the adjustment of the appliance are compatible
3.1. General Safety Requirements
Before commencing installation, ensure that the intended installation will comply
with details in
General Information on Page 1 .
3.2. Flue Requirements
General
The installation of the fire in GB should follow the recommendations of the following current
British Standards:
BS 5871: Pt 2 Installation of Inset live fuel effect gas fires.
BS 6891 Pipe work Installation
BS 5440: Pts 1 & 2 Flues and Ventilation
BS EN 1856 Chimneys - Requirements for metal chimneys - System chimney
products
BS 715 Metal flue boxes
BS EN 1858 Chimney – Components – Concrete flue blocks
In IE equivalent rules in force must be used.
3.2.1. Masonry Flue
1. The flue serving this appliance shall have no cross sectional dimension less than 175mm
(7”) e.g. 225mm (9”) by 225mm (9”) Masonry chimney or 175mm (7”) diameter clay liner
and a minimum equivalent height of 3 metres (10ft). For installation in GB, please refer to
BS 5871 Part 3 for further information. For installation in IE, refer to the current edition of
I.S.813 “Domestic Gas Installations”.
2. A faulty flue or chimney may result in smoke and fumes entering the room.
3. The flue should be sound, free from obstructions and, if it has previously been used with a
solid fuel or oil fired appliance, it should be swept before installing this gas fire. The flue
must be inspected annually to ensure continued clearance of combustion products.
4. Any flue damper plates or obstructions etc. must be removed and no restrictor plates shall
be fitted. Where removal is not practical, the damper plate/restrictor must be fixed
permanently in the fully open position.
Note: To comply with the expression “permanently fixed in the open position”, a
mechanical fixing that prevents user intervention should be used e.g. requires
the use of tools for removal.
5. It is recommended that a smoke test be carried out before installation to ensure that there
is no spillage of fumes into the room. If spillage occurs this problem must be rectified
before commencing installation.