Magiglo Premos 18" Inset, Инструкция для пользователя, установки и обслуживания

Страница: 5 / 52

Page 1
1. G
ENERAL
I
NFORMATION
Introduction
1. This appliance is suitable for installation in GB and IE and should be installed in
accordance with the rules in force.
In GB, the installation must be carried out by a Gas Safe Registered Installer registered for
working on this type of appliance. It must be carried out in accordance with the relevant
requirements of the:
•
Gas Safety (Installation and Use) Regulations.
•
The appropriate Building Regulations either The Building Regulations, The
Building Regulations (Scotland), Building Regulations (Northern Ireland).
Where no specific instructions are given, reference should be made to the relevant British
Standard Code of Practice.
In IE, the installation must be carried out by a Competent Person and installed in
accordance with the current edition of I.S.813 “Domestic Gas Installations”, the current
Building Regulations and reference should be made to the current ETCI rules for electrical
installation.
On completion of an installation in IE, it is necessary to complete a “Declaration of
Conformity” to indicate compliance to I.S.813.
2. In other EC countries equivalent rules in force must be used.
3. It is important for correct combustion of this fire that the imitation fuel is placed in
accordance with the instructions given in this and associated booklets. Only approved
imitation fuel, available from Burley Magiglo., should be used with this appliance.
4. It is recommended that a fire guard complying with BS 8423 be fitted for the protection of
young children, the elderly or infirm.
5. This fire is intended for decorative purposes only.
6. The user is warned not to throw any rubbish onto the fire or to disturb the fuel bed.
7. The user is advised that the ceramics used within this appliance require extra care whilst
cleaning. Please refer to the Cleaning Instructions.
8. It is important for this fire to be serviced regularly. An annual service is recommended.
Ventilation Requirements
1. For this model a minimum of 100cm
2
of ventilation is required in the room that the fire is
fitted. In GB reference should be made to BS 5871:Part 3, and in IE, reference should be
made to the current edition of I.S.813 which makes clear the conditions that must be met
to demonstrate that sufficient ventilation is available.
2. Any purpose provided ventilation must be checked periodically to ensure it is free from
obstructions.
3. When fitting the fire in Northern Ireland (NI), purpose provided ventilation must be
provided in accordance with the rules in force.
4. In other EC countries equivalent rules in force must be used.