MAGICO Q7, Процедура сборки

Страница: 8 / 69

Locate the Q7-04 (shown in orange). Place the
-04 in the skeleton assembly. Before fastening
down the -04 make sure all braces are flush
with the -04 and that everything lines up. The -
04 is a good indicator when a brace is not
flush, it will “stand out” amongst others. The
trick to fixing these braces will be to use a
power clamp.
Use the power clamp
to force a brace to
sit flush with the -04,
once flush, fasten
the -04 to the
skeleton assembly.
There is a chance
that the power
clamp will not be
effective. In these
cases, you will have
to loosen the
fasteners on the -65
braces and adjust
the questionable
brace.
Once this has been done, you will
flip the skeleton assembly up and
over and install an -04 on the
opposite side. Fasten the -04s to
the skeleton assembly with 7/8” ¼-
20 fasteners with washers and red
Loctite.
Fasten -04s to -10 plate with ¼-20
2” fasteners with washers and red
Loctite.
7 | P a g e