MAGICO Q7, Процедура сборки

Страница: 30 / 69

After those three battens are fastened to
the Q7-08, compare it to this image to the
right to compare and make sure everything
is installed correctly.
Find and unwrap the Q7-13. Install
the Q7-24 batten to the end of the -
13. Place the -08 on to the -13. The
large hole drilled in the middle near
the edge of the -13 is the indicator of
the rear side of the cabinet. The -08
should be flush with the -13 on the
bottom and front/rear sides. Fasten
down by feeding fasteners through
the -29 and in to the -13 plate. Use 1
1/8” ¼-20 fasteners with washers
and red Loctite.
Locate and QC the Q7-07. Check
every corner and edge for cosmetic
imperfections. Report any issues to
your supervisor to get approved.
24 | P a g e