MAGICO Q7, Процедура сборки

Страница: 13 / 69

Fasten the Q7-39 frame batten
underneath the skeleton. Fasten
batten down to the -17 using ¾” ¼-
20 fasteners with washers and red
Loctite. Make sure the two ends of
this batten are flush with its
neighboring parts, it should be flush
with the -14 plate above it and the -
43 plate below it.
Fasten the Q7-40 batten underneath
the skeleton. This batten should fit
snugly underneath all braces but
there is a slight chance that this
batten will stick out past the edge of
the Q7-17, if this is the case, and you
cannot flush this batten, you need to
cut or file small notches into this
batten at the locations of the brace
contact. Fasten batten down using
¾” ¼-20 fasteners with washers and
red Loctite.
11 | P a g e