Maintenance
0
Interior of Laminator
Dirt during card feed or burrs caused by friction between
the bobbin holder and bobbin may adhere to the card or
film, causing lamination defects as a result.
Cautions:
Start work after ensuring that the power has been turned
off.
If the security lock of the card printer is on, deactivate it.
After work is complete, activate the security lock again.
For details on locking/unlocking the security lock, refer to
the manual of the card printer.
Stand the film cassette on a flat surface. Avoid doing so
on a floor as dust attached to the film may cause poor
adhesion or malfunction.
A film cassette that has laminate film attached on it is
heavy. Hold the film cassette with both hands to avoid
dropping when working with it.
1
Open the laminator door
●
●
●
●
●
2
Remove any slack in the laminate film
Turn the knob on the film cassette in the direction
indicated by the arrow.
3
Press and hold down the cassette button, and pull
out the film cassette
●
