Operating the Laminator
1
Operation Panel
The status display of the laminator is displayed on the operation panel of the card printer as well as the status monitor of the
computer that is connected to the card printer.
The status is indicated on the laminator unit using a combination of solid and blinking LED displays in red and blue colors.
Card printer operation panel
R e a d y
R e a d y
R e s e t
M e n u
A
B
D
C
Printer status display
Displays the status of the card printer.
Laminator status display
Displays the status of the laminator when the display
mode of the card printer is set to [Laminator State].
(
A
page 15 “Setting Procedures for Laminator Status
Display”)
Status icon display
A laminator icon is displayed once the card printer
recognizes the laminator.
Operation button
For selecting a button function displayed on the operation
panel.
■
A
●
B
●
C
●
D
●
Laminator operation panel
A
C
B
LED display (red)
Indicates an error when only the red light is lit or blinking.
LED display (blue)
Indicates that the laminator is functioning normally when
only the blue light is lit or blinking.
Operation button
Pressing this button when the film is loaded will reset the
laminator settings.
When no film cassette is loaded on the top and bottom
sides, pressing the button for two seconds or longer starts
the cleaning operation. (The cleaning operation does not
start if the heating roller is still hot.)
(
A
page 25 “Card Feed Roller/Heating Roller”)
■
A
●
B
●
C
●
●
●
●
Operating the Laminator
