11
Installation and Connection
Installation Location
Ventilation holes for the cooling fan are located at the rear
of the laminator as well as the side and rear of the card
printer.
Allow a clearance of at least 20 cm between the sides of
the laminator and the wall.
Allow a clearance of at least 10 cm between the rear of
the laminator and the wall.
Do not place any object on the laminator.
●
●
●
●
Card Printer Connection
1
Fit the card printer to the supplied unit connection
adapter
2
Fit the laminator to the supplied unit connection
adapter
Card Printer
Connection
Cautions:
Do not hold the rear filter cover when installing or moving
the laminator. The filter cover may be damaged or
detached from the laminator, causing the laminator to fall
off and resulting in injuries.
Make sure that you connect the units on a flat and firm
surface.
Insert the unit connection adapter firmly into the card
printer connection. Cards cannot be fed if there is a
difference in level.
After installation, if you need to remove the laminator from
the card printer, turn off the power of the card printer.
●
●
●
●
Setup
