MACROMEDIA FIREWORKS 2, Руководство пользователя

Страница: 62 / 156

Chapter 2 62
Choosing Edit Gradient opens the Edit Gradient dialog
box. Choose a preset Gradient from the Preset Options
pop-up. Click an area under the color ramp to add a
color well. Click and drag any color well below the color
ramp to change the transition between colors in the fill.
Double-click any color well to pick a color from the
color palette pop-up menu. Add as many colors to the
color ramp as you want.
Editing a fill with the Paint Bucket tool
Choose the Paint Bucket tool to quickly edit a selected
object’s fill.
◆
When the Fill panel has a fill of None, Solid, or
Web Dither, clicking inside the object with the
Paint Bucket tool adds the color in the fill color well
as a Solid or Web Dither fill.
◆
When the Fill panel has a Pattern or Gradient fill,
clicking the Paint Bucket tool places the round
paint bucket handle, which represents the center or
starting point of the fill.
◆
When choosing a new Pattern or Gradient fill type
in the Fill panel, clicking inside a selected object
applies the new fill type to the object.
Filling areas of similar color
On image objects, use the Paint Bucket tool to fill areas
of similar color. With the Paint Bucket tool selected, set
the tolerance on the Tool Options panel to determine
the range of similar colors to be filled.
A tolerance setting of 0 (zero) causes the Paint Bucket
tool to fill a solid area of a single color. Higher tolerance
settings will cause the Paint Bucket tool to fill adjoining
areas near in color to the color that was clicked.
To fill the entire image or selection, rather than similar
colors, check Fill Selection Only on the Tool Options
panel when the Paint Bucket tool is selected.
Adjusting a fill interactively
To change or distort a selected object’s Pattern or
Gradient fill, choose the Paint Bucket tool. An L-shaped
or linear set of handles appears on or near the object. Use
these handles to adjust the object’s fill.
Edit Gradient dialog box
Paint Bucket tool
Use the Paint Bucket tool handles to interactively adjust a
Pattern or Gradient fill.
Drag to
adjust fill
width and
skew.
Drag to
adjust fill
angle.
Drag to
place a fill’s
center or
first color.