MACON
Multi-Function Water To Water Heat Pump
1.2 The unit can be installed inside floor or any other inside convenient place and reliable load -bearing.
1.3 The installation position can hold the unit without noise and shake.
1.4 No sunlight to the unit.
1.5 The installation position will not be affected by garbage, oil and mist.
1.6 The unit will be damaged under the condition with oil(engine oil), salt(sea area) and sulfide air(near
thermal spring and refining factory).
6
6
2. water tank(hot water tank and buffer water tank) install location select
2
.1 The water tank can be installed in the outdoor with heat pump outdoor unit, such as balconies, roofs,
floors, also can be installed in the room.
2.2 Water tank must be standing install, the installation place is a solid foundation, must be bear the
weight of the tank when full of water.
2.3 Around the water tank , as well as water pipes and hot water pipes should install a valve.
2.4 Do not install the water tank, where exist pollute and corrosive gases.
3. The unit and water tank installation
3
.1 Unit install base is concrete structures, also can be made of steel angle brackets, plus vibration rubber
pad placed on the ground or roof, to ensure the unit horizontally.
3.2 Installed base design should in accordance with units and water tanks installed size And operational
quality.
3.3 Directly use expansion bolts to fix unit and water tank to the concrete base.
3.4 Around the unit and tank should be drain or outlet.
1.
Unit installation position
1. Unit installation position
III. Installation
1.1
Please keep enough space around the unit for repair. Correct and wrong means as below:
Wrong
Correct
