3
Product features
3 Product features
1. Notice
1. Notice
2. Warning
2. Warning
1.1 This manual includes all necessary information of proper installation, debugging,
operation and maintenance.
1.2 In order to use this product better and safer, please read this instruction carefully
before install and operate it. Please pay attention to all the notice in operation and
maintenance. Save all manuals and documentation for future reference.
1.3 Water to water heat pump is a special appliance. Improper installation will cause
damage and danger. It should be installed and maintained by the professionals.
Please contact our authorized local service site for installation and maintenance.
Please read and follow this instruction carefully before and during installation.
Remarks: We will not bear the responsibility for any personal injury or unit damage
caused by non-compliance of the regulations and instruction in this manual.
2.1 Please check whether the distribution power capacity, switch and socket are compliance
with the requirements of our unit power. Details please refer to the rating label or parameter
table in this manual.
2.2 The power should be equipped with leakage protection separately. Power cable should be
chosen in accordance with the operation requirements of the unit.
2.3 The unit must be grounded safely. Do not use the unit if grounded unsafely. Do not connect
the ground line to the neutral and or tap water pipe.
2.4 The wire must be joined in compliance with the requirements of the wiring chart. Do not
alternate and or repair the unit personally.
2.5 The water temperature will reach above 52
, which will cause burning if the unit with heat
recovery. The water can be used only after mix of the hot water and cold water in the tank.
2.6 Do not install the unit closed to inflammable, explosive and naked light spot.
2.7 To ensure the unit operate properly, please equipped with a filter in the water input when
installation.
2.8 Please contact us or our authorized service site if the unit failures. The unit can
t be used
again without technicians checking.
2.9 The unit parameter has been set before leave of the factory. The parameter can
t be
adjusted by the unprofessional.
3.1 Environment friendly. No pollution to the environment and energy save. It is environment
friendly product and compliance with our energy and environment requirements.
3.2 Multifunction. Air cooled water chiller has"cooling"," heating", "c hot water" ,
"h hot water" and "heating" function.
3.3 Endurance. The unit equipped with famous brand compressor, water pump, plate and high
efficient hexagon coaxial screw tube exchanger. The unit can operate stable and efficiently
under different condition with advanced control system.
3.4 Advanced control means: All performance data can be set and read on the remote controller
by the microcomputer.
3.5 Wide use range. The unit can supply cooling even it is 43 and supply heating even it is 7
.
1
1
I. Introduction
Multi-Function Water To Water Heat Pump
MACON
