SHOWBOX BATTERY POWERED ALL-IN-ONE PERFORMANCE RIG WITH BREAKAWAY MIX CONTROL
34
Chapter 5 : Placement
Introduction
WARNING
: Installation should only be done by an experienced technician. Improper installation may result
in damage to the equipment, injury or – while highly unlikely – death. Make sure that the ShowBox is installed
in a stable and secure way in order to avoid any conditions that may be dangerous for persons or structures.
ShowBox is designed to sit on the floor or stage as the main PA or as monitors. They may also be pole-mounted via the built-in
socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the ShowBox. The T100 is a great
tripod option and the SPM200 (unthreaded) or SPM400 (threaded) is a nice choice when using a subwoofer.
ShowBox does not have any fly points and may NOT be flown. NEVER attempt to suspend a ShowBox by its handles.
Check to make sure that the support surface (e.g. floor, etc.) has the necessary mechanical characteristics to support
the weight of the ShowBox.
When pole-mounting ShowBox, be sure that they are stabilized and secured from falling over or being accidentally pushed over.
Failure to follow these precautions may result in damage to the equipment, personal injury, or death.
ShowBox may also be laid out horizontally as a monitor at a 45˚ angle (as seen below). It is intended to be used only
when the speaker is in its wedge configuration and works best when on a hard work surface, like a stage.
As seen above, the Running Man logo is rotatable for when ShowBox is used as a monitor!
As with any powered components, protect them from moisture. Avoid installing ShowBox in places exposed to harsh weather
conditions. If you are setting them up outdoors, make sure they are under cover if you expect rain.
