SHOWBOX BATTERY POWERED ALL-IN-ONE PERFORMANCE RIG WITH BREAKAWAY MIX CONTROL
16
Breakaway Mixer Data Port
This port sends and receives data to/from the breakaway mixer via the included CAT5 cable.
This port is on the ShowBox. It will connect to the same data port on the breakaway mixer.
Additionally, the data port provides power to the USB-C connector on the rear panel of the breakaway mixer.
If the included CAT5 cable goes missing, gets chewed up by the cat and/or dog, and/or otherwise does
not work, any major-brand CAT5 cable would make a fine replacement. Just make sure it’s long enough to easily connect
the ShowBox to the breakaway mixer.
Battery Replacement
The Lithium-Ion Battery allows you to use ShowBox without the need to be plugged in or wasting money on expensive batteries.
This is great for mobile gigging, live streaming, and more!
SAFETY FIRST:
Before installing and using this product, please read these instructions carefully.
Failure to follow the precautions may result in damage, injury, or even death.
1. WARNING:
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine,
fire or the like.
2. CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
3.
No open flame sources, such as lighted candles, should be placed on the apparatus.
WARNING:
When installing this product, always respect the safety standard. Do not install the product in any way
that is not described in these instructions.
BATTERY / COVER REMOVAL INSTRUCTIONS:
Unplug and power off the ShowBox and set it grille side down on a soft, flat surface.
Using a flathead or Phillips screwdriver, rotate the two locking tabs counter-clockwise.
It should only be 1/4 to 1/2 a turn to unlock. Remove the battery compartment cover and set it aside.
