SHOWBOX BATTERY POWERED ALL-IN-ONE PERFORMANCE RIG WITH BREAKAWAY MIX CONTROL
13
Mix Out Jack
This is a male XLR-type connector that produces a line-level summed-mono mix of all inputs
(including Bluetooth). Use it to daisy-chain several ShowBoxes together off the same signal
source(s) or add a subwoofer.
This output level is NOT affected by the main volume level and is post-channel fader and DSP,
but pre-main fader. However, this output level IS affected by the main mute button!
It is wired as follows, according to standards specified by the AES (Audio Engineering Society):
Balanced XLR Output Connector:
Pin 1 – Shield (ground)
Pin 2 – Positive (+ or hot)
Pin 3 – Negative (– or cold)
See page 39 to learn more about daisy-chaining ShowBoxes.
USB-C Interface
This is a 2x2 interface that allows audio to stream to (and from) the ShowBox via smartphone or computer.
This is the perfect tool to use when live streaming, including Facebook Live®, Instagram Live®, YouTube Live
Streaming®, and Twitch®... or recording direct to computer for fun!
USB Audio IN –
This connector allows the ability to transmit a
STEREO MIX OF ALL INPUTS TO
ShowBox
from a connected computer or smartphone.
USB Audio OUT –
This connector allows the ability to transmit a
STEREO MIX OF ALL INPUTS
(including Bluetooth) FROM
ShowBox to a connected computer or smartphone.
This output level is NOT affected by the main volume level. Additionally, it is post-channel fader/DSP, but pre-main fader.
Audio resolution is 24-bit / 48 kHz. This port also allows for future firmware updates to the ShowBox via connected PC.
If connected to computer, don’t forget to change the input and output to ‘ShowBox’ via Settings.
If connected to a smartphone, don’t forget to raise the volume of the device.
ShowBox’s USB-C connection is audio only. It is not a source of power.
Directly to the right of the USB-C port is a very small hole. This hole is for conducting firmware updates via bent
paperclip. Please download the firmware updating software from the product page to make sure you have the latest.
Additionally, The RTC may be changed to your time zone by doing a firmware update. When a firmware update
is completed, the RTC will sync with the time currently set on the computer that is connected to the ShowBox.
2
1
SHIELD
COLD
HOT
3
SHIELD
COLD
HOT
3
2
1
