Mackie DC16 Скачать руководство пользователя страница 39

Страница: 39 / 84

DC16 Owner’s Manual

Whereas you’re able to raise and lower the inputs and outputs

of the selected mix

while in MIXES

mode, no inputs are available when in MASTERS mode. MASTERS mode is strictly for raising and

lowering

the selected master

[LR, aux, FX, subs, VCAs and/or matrix]. DC16 is smart, only recalling

your specific mix selector and masters set up. In other words, any changes made in MASTERS mode

will then be evident in MIXES mode upon your return. It would only be fair, then, that the opposite

also be true...and it is! Any changes made in MIXES mode will be evident in MASTERS mode, too.

Press the MAST button to exit masters and return back to the mix selector.

• CLEAR SOLO Button

The Clear Solo button’s LED on DC16 illuminates orange to serve as a reminder that a soloed channel

exists somewhere, be it an input or output. This is especially useful when an output is soloed and you

switch to adjust a different channel on a different output. Pressing this button will clear all solos on all

inputs and outputs, including the ones you can’t see.

• TALK(back) Button

The talkback button allows you to easily enable or disable talkback at will, routing talkback to all

configured destinations. This button’s LED illuminates green when pressed, indicating just how

engaged it is.

Talkback may be assigned (and unassigned) to outputs simply by utilizing the assign modifier button.

More details in the “Modifiers” section.

There are other options, too! There is a 1/4" TRS connector on the rear panel

of the DC16. Here is where to connect your favorite one-button on / off footswitch.

Pressing the footswitch will enable / disable talkback.

Additionally, talkback may be enabled / disabled via Master Fader’s Quick Access Panel...

but we know that you already knew that!

Wedges

In-ears

ALL

AUX

Subgroup

VCA

Matrix

Multiselect

Содержание DC16





















































































Результаты поиска

Содержание DC16

Отзывы:

Бренды по названию

Популярные бренды

Mackie DC16, Руководство пользователя

Результаты поиска

Содержание DC16

Отзывы:

Бренды по названию

Популярные бренды