Mackie DC16 страница 26 Скачать руководство пользователя

Страница: 26 / 84

DC16 Owner’s Manual

• Editing Page Buttons

On the far right of the channel displays strip are two editing page buttons with one arrow pointing up

and the other pointing down. These are for displaying additional parameters. For example, parametric

EQ has a TON of parameters that may be edited, but there are only 16 channel displays with encoders.

Simply push these buttons to view the other available parameters.

These button LEDs are always illuminated

when they are available for use

. If they’re not

illuminated, all parameters are displayed and awaiting your changes.

Banking Group Selector

In the lower right corner of DC16 (below the Mix Selector) are four buttons that make up the Banking Group.

As seen below, two buttons are for switching banks and two are for switching channels.

• BANK Buttons

These buttons shift the currently shown channels, returns, FX, subs, VCAs OR masters left or right

in groups of 16.

• CHANNEL Buttons

These buttons shift the currently shown channels, returns, FX, subs, VCAs OR masters left or right

one at a time.

Below are a couple of notes regarding bank and channel shifting that you should be aware of...:

Banking and channel shifting only works when there are more than 16 channels

in the selected view group (including “All”).

LED status: The banking and channel button LEDs are always illuminated

when they are

available for use

. If the button LEDs are not illuminated, then the DC16 is banked as far left

or right as far as it can be. There will always be a minimum of two button LEDs illuminated,

one bank and one channel.

Wedges

In-ears

Bank / Channel

Содержание DC16





















































































Результаты поиска

Содержание DC16

Отзывы:

Похожие инструкции для DC16

Бренды по названию

Популярные бренды

Mackie DC16, Руководство пользователя

Результаты поиска

Содержание DC16

Отзывы:

Похожие инструкции для DC16

Бренды по названию

Популярные бренды