Macherey-Nagel NANOCOLOR UV/VIS II Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 99

Macherey-Nagel NANOCOLOR UV/VIS II Скачать руководство пользователя страница 86

User accounts

86

NANOCOLOR

®

UV

/

VIS

II and

NANOCOLOR

®

VIS

II V 1.1 / 10.2017

6.7

User accounts

The spectrophotometer allows a user management system with the creation of multiple user
accounts with various rights. The instrument is delivered in the Open Mode by default. There
are no limitations to user rights in this mode. To switch to the User Mode, first a user account

has to be created.

Afterwards, the “Open Mode” can be enabled und disabled using the

icon (see

Figutre 110

).

Press the

icon to access the menu to create a user account. In the user account menu,

the users already registered are listed in a window on the left hand side (Figutre 110). If a
user has not been created yet, the list will be empty.

Figutre 110: User accounts list

Press the

icon to create a new user (see Figure 111). Enter a user name and password

using the text keypad. The password has to be entered twice. If the administrator checkbox
is checked, the user has unlimited rights with the instrument. When disabled, the user is no
longer allowed to change selected instrument settings, delete measurement values or edit
users. Setting up a password is mandatory for adminstrator accounts. The new user can be
given a user avatar by tapping on the default image. It can either be chosen from the list of
pre-defined avatars or be uploaded from an external storage device after pressing the

symbol. Confirming with

saves the new account and adds it to the the list of users.

All enterd users will be automatically available for selection of sample information in the field
“User” after the measurement process (see Section 5.2.1).

«
...
84
85
86
87
88
...
»

Содержание NANOCOLOR UV/VIS II




































































































Отзывы:

Нет отзывов