Macherey-Nagel NANOCOLOR UV/VIS II Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 99

Macherey-Nagel NANOCOLOR UV/VIS II Скачать руководство пользователя страница 8

Safety precautions

8

NANOCOLOR

®

UV

/

VIS

II and

NANOCOLOR

®

VIS

II V 1.1 / 10.2017

2

Safety precautions

Please  read  the  instruction  manual  carefully  before  setting  up  and  using  the  instrument.  In
case  instructions  are  disregarded,  the  instrument  may  malfunction  or  get  damaged.  To
ensure  perfect  performance  of  the  instrument,  it  may  only  be  used  as  described  in  this
manual.  Please  pay  particular  attention  to  the  following  warning  notices,  which  indicate

special dangers when using the instrument.

Caution:

Imminent danger of an electric shock.

Caution

:

Follow the instructions in this section carefully to ensure the device does not
become damaged.

Warning:

The instructions in this section must be followed carefully to ensure that

no further dangers or hazards exist, otherwise the device will very likely become

damaged.

Caution:

Indicates danger by laser radiation.

Warning against biological hazards to users that can result from the use of the
device. Note also the information in the

“Chemical and biological safety” section.

2.1

Input supply

To ensure safe functioning of the instrument, please use the included power cable
or power adapter only.

2.2

Chemical and biological safety

Warning

: Working with chemicals can be hazardous. Handling chemicals

without protection can lead to serious injuries. When working with the

NANOCOLOR

®

spectrophotometers wear the required personal protective

equipment.

During normal operation of this device, it may be necessary to use chemicals that are
hazardous to your health or biologically harmful samples.

Before handling these substances, read all hazard statements and safety information printed
on the containers with the original solutions and in the safety data sheets. All used solutions
must  be  disposed  of  in  accordance  with  the  national  laws  and  regulations.  The  type  of
protective  equipment  must  be  selected  according  to  the  concentration  and  amount  of  the
hazardous substance present at the corresponding workplace. Rinse the hoses and cuvettes
thoroughly  after  use  with  distilled  water  or  a  rinsing  solution  recommended  by  the
manufacturer.

2.3

Protective clothing

As protective clothing we recommend to wear protection gloves and a laboratory coat.

2.4

Improper handling

In case of improper handling or handling operation by untrained personnel, MACHEREY-
NAGEL declines any warranty claims.

2.5

Damage of casing

Caution

: If the housing is damaged, the instrument needs to be sent in for repair.

In such a case, the proper functioning of the instrument as well as the correctness
of the measurement results cannot be guaranteed anymore.

«
...
6
7
8
9
10
...
»

Содержание NANOCOLOR UV/VIS II




































































































Отзывы:

Нет отзывов