Macherey-Nagel NANOCOLOR UV/VIS II Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 99

Macherey-Nagel NANOCOLOR UV/VIS II Скачать руководство пользователя страница 14

Operation and user guidance

14

NANOCOLOR

®

UV

/

VIS

II and

NANOCOLOR

®

VIS

II V 1.1 / 10.2017

Figure 12: Status bar

In case of activated special features (e.g. memory, reaction time, etc.), a status icon appears.
The  status  icon  in  the  upper  left  corner  displays  whether  the  instrument  is  ready  to  use.  A
green  icon  indicates  that  the  instrument  is  ready  to  use.  A  red  icon  indicates  that  the
instrument  is  currently  busy,  e.g.  with  a  measurement  process.  The  instrument  can  be
operated via the task bar.

Figure 13: Task bar

During the measuring process the bar is inactive (shaded appearance).

Task bar functions:

Home icon:

By pressing this icon at any position in the menu, one is guided back to the start
screen

(see Figure 7)

. From the start screen, it is not possible to get back to the last

application via the

icon.

Back icon:

By pressing this icon, one goes back to the application or level that was used last.

Please consider that some menus cannot be retrieved by pressing the

icon

(e.g. measurement menu), as the process has been ended by leaving the respective menu.

Feature icon:

By tapping this icon, one can activate additional features as long as they are
available in the selected menu.

Test icon:

By pressing this icon, basic features as well as MACHEREY-NAGEL tests and
applications, such as special methods, scan, color measurement or test number

can be selected in the method menu.

Main menu icon:

By pressing this icon, one can get to the main menu, including settings, the IQC
menu as well as other functions.

Memory icon:

By pressing this icon, the measurement memory is opened. All measurement

results obtained via the programs in the methods menu (

icon) are saved here.

4.3.3

Favorites bar

Figure 14: Favorites bar on the start screen

The instrument allows you to add favorites to the start screen to personalize the instrument
and to provide quick access to the most preferred functions. Initially, the favourites bar
features the icon for

NANOCOLOR

®

tube tests. Other icons can be added to the favorite bar

«
...
12
13
14
15
16
...
»

Содержание NANOCOLOR UV/VIS II




































































































Отзывы:

Нет отзывов