Chapter 3 Main System Application
I/O Device Setting
The GV-System is capable of connecting up a total of 144 I/O devices when coping with
Geovision’s exclusive developed I/O modules (GV-NET, PT-811, PT-908). This section will
explain on how to configure and integrate I/O devices in the GV-System.
[Select I/O Device]
Before you can start using the I/O modules you have to setup the GV-System to recognize
them first. You should have at least one GV-NET module connected to the Com port of your
computer. Now in the [Select I/O Device] area choose the module you wish to install in the
[Device] drop down menu, select Com port and address, then click [Format Add] button. The
[Add] button will be unlocked if the system successfully found your module. Click the [Add]
button and this module will appear in the Module List Window.
Note:
When you add several I/O devices (Max 9) in one GV-Net, you cannot do Format Addr.
at the same time. First you must Format Addr. to I.O devices one by one, than add all
I.O device in GV-Net.
Page 35
DVR-9404~9408~9416
Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE
Содержание DVR-9404
Страница 1: ......
